Zenith C-30HDG Chainsaw User Manual


 
MAYCO C-30HDG PUMP — OPERATION AND PARTS MANUAL — REV. #6 (04/02/12) — PAGE 35
Gasoline Check
1. Remove the gasoline cap located on top of fuel tank.
2. Handle Fuel in a safety container. If the container does not
have a spout use a funnel.
3. Visually inspect to see if fuel level is low. If fuel is low,
replenish with unleaded fuel. When refueling, be sure to use
a strainer for filtration. DO NOT top-off fuel. Wipe up any
spilled fuel.
4. Pay attention to the fuel tank capacity when replenishing fuel.
Refer to the fuel tank capacity listed in Table 5.
C-30HDG PUMP — INSPECTION
Lubrication Box
The model C-30HDG model features a fully enclosed
lubrication box,
which utilizes the
"SPLASH"
method of
lubrication.
Before using your new pump, 7 gallons of SAE 30 motor oil must
be added directly into the lubrication box. Visually inspect the oil
in the lubrication box by making sure the oil is at the correct
operating level as indicated by the dip stick (Figure 16).
Also reference the oil level decal (Figure 17) adjacent to the
lubrication box.
Figure 16. Lubrication Box Dipstick
Figure 17. Lubrication Box Oil Caution Decal
EPYTLIO.5ELBAT
nosaeSerutarepmeTepyTliO
remmuS52
o
retaergdnaC03-W01EAS
llaF/gnirpS01
o
52otC
o
C02/03-W01EAS
retniW0
o
rewoLroC01-W01EAS
Gasoline
is extremely flammable, and its
vapors can cause an explosion if ignited.
DO NOT start the engine near spilled fuel
or combustible fluids. DO NOT fill the fuel
tank while the engine is running or hot.
DO NOT overfill tank, since spilled fuel
could ignite if it comes into contact with hot engine parts or
sparks from the ignition system. Store fuel in approved
containers, in well-ventilated areas and away from sparks and
flames. NEVER use fuel as a cleaning agent.
DO NOT smoke while refueling, motor fuels are highly
flammable and can be dangerous if mishandled.
WARNING - EXPLOSIVE FUEL
Make sure the pump is on a secure level surface
when checking the oil level inside the lubrication box.
CAUTION -
Checking Lubrication Oil Levels
The oil level must be
checked daily
to ensure adequate oil
level and oil cleaniness.