Filter
Top Products
58
SERVICE JOURNAL
Delivery Service
1. Charge the battery.
2. Mount the rear wheels.
3. Adjust the tire pressure of all wheels to 16 PSI.
4. Mount the steering controls in the normal position.
5. Connect the lever to the seat stop.
6. Connect the contact box to the cable for the seat’s
safety switch.
7. Mount the arm rests on the seat’s back support.
8. Check that the right amount of oil is in the engine.
9. Check that the right amount of oil is in the hydraulic tank.
10. Adjust the position of the steering controls.
11. Fill with fuel and open the fuel shut-off.
12. Connect the exhaust fumes extractor.
13. Start the engine.
14. Check that there is drive to both wheels.
15. Vent the hydraulic system if necessary.
16. Check the mower deck adjustment.
17. Check:
The safety switch for the parking brake.
The safety switch for the mower deck.
The safety switch in the seat.
The safety switch in the steering controls.
Parking brake functionality.
Driving forward.
Driving backward.
Engaging the blades.
18. Check the idle speed 1300 rpm.
19. Check the engine speed 3600 rpm
Service Journal
Action
Date, mtr reading, stamp, sign