Filter
Top Products
45
LUBRICATION
Lubrication
Lubrication Schedule
Lubrication schedule
8011-620
General
Remove the ignition key to prevent unintentional movements during lubrication.
When lubricating with an oil can, it should be filled with engine oil.
When lubricating with grease, unless otherwise stated, a lithium based grease or another chassis or
ball bearing grease, offering good corrosion protection should be used.
With daily use, the machine should be lubricated twice weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should
this happen, attempt to clean them with spirits. If the belt continues to slip after cleaning with spirits, it
must be replaced. Gasoline or other petroleum products must not be used to clean belts.