Filter
Top Products
24
CONTROLS
Hydraulic switch
BAM-2
The mower deck’s lifting leer and foot pedal
BAM-11
Manual Lifting Lever with Foot Assist for
the Mower Deck
The lifting lever is used to place the mower deck
in the transport position or one of the 17 different
cutting height positions.
The cutting height is set by placing a pin in the
hole for the desired cutting height and the pin is
then locked on the inside (hidden in the illustration)
with the supplied cotter pin.
1. Pull the lever backward while pushing on the
foot pedal, lifting the deck to the locked position.
The deck is then raised.
2. Depress the lock handle, counter hold, and
move the lifting lever forward toward the pin to
engage the set cutting height. The deck is then
lowered.
3. The lifting lever can also be used to temporarily
adjust the cutting height, such as when
passing a minor bump in the lawn.
In order to obtain an even cutting height it
is important that the air pressure in all four
tires is the same (16 psi).
IMPORTANT INFORMATION
Pin must be locked into a hole for trans-
port or mowing.
IMPORTANT INFORMATION
Hydraulic Lift for the Mower Deck
1. Place pin in the appropriate hole for desired
cutting height, secure with cotter pin.
2. Push switch forward on the console to lower
deck to the set cutting height.
3. Pull backwards on the switch on the console
to raise the deck for transport.