Filter
Top Products
www.iOptron.com
5
NOTE:
Make sure that your
telescope is not too
heavy for your mount
Chapter 0 Quick Start Reference
0.1 Assembly
1. Unpack the package, take out all the parts.
2. Set up the tripod(6).
3. Put the mount(5) on the top of tripod(6), hold the
mount with one hand, put the supporting rod(7)
through the hole on the top of tripod with the other
hand, screw and tighten the mount on the top of
tripod(6).
4. Tighten the telescope tube(1) on the dovetail with lock
(2), point the tube upward vertically and tighten the
altitude lock (4).
FIG. 1
1. Telescope tube
2. Dovetail lock
3. Hand held controller
4. Altitude lock