Filter
Top Products
Connecting the ISC-S Cable
975-0059-01-01 Rev A 2–17
Figure 2-10
The ISC-S Cable Connected to Dual Sine Wave Plus Inverters
Connect one end of ISC-S
Cable to the Stacking Port
of the L1 inverter.
Connect the other end of
ISC-S Cable to the Stacking
Port of the L2 inverter.
CAUTION; Damage to Loads
Until the units are tested, do not connect any loads to the inverters. Proceed to the next
chapter for Start up and Functional Testing Procedures.