Filter
Top Products
2–4 445-0127-01-01
Recharging XPower 1500
1. The battery’s charge level may be seen by pressing the Battery Status
switch on the AC Power Panel.
2. To recharge, plug the AC Charger into a standard 115-volt AC outlet
and the DC plug into the DC Power Socket (located on the DC Power
Panel). The Recharge Indicator on the AC Charger will change from
amber to green when charging is complete (up to 15 hours). It is safe
(and recommended) to leave the AC Charger connected indefinitely.
3. Charging may also be done from an automobile lighter socket. See
“Recharging XPower 1500” on page 2–16 for details.
Using XPower 1500 to Jump-Start Your Vehicle
Due to potential dangers, see “Vehicle or Boat Engine Starting” on
page 2–14 for a detailed explanation.
Important:
Review the safety information in the AC Charger Owner’s Guide
(also enclosed) before recharging XPower 1500.