Filter
Top Products
Owner Service 19
MAN0765 (12/5/2008)
1. Fill CV double yokes with 20 pumps of grease with
the joints in a straight line.
2. Articulate CV body to maximum angle several
times to ensure full coverage of joints.
3. Place joints in the straight position and add 10
additional pumps of grease to both joints.
4. Wipe telescoping drive clean of all old grease and
contaminants.
5. Add a thin layer of new grease over telescoping
drive.
Figure 2. Trailer Lubrication Points
Figure 3. Deck Lubrication Points
REF DESCRIPTION FREQUENCY
1. Driveline U-Joints 8 Hours
2. Telescoping Shaft 8 Hours
3. CV Body 8 Hours
4. Shield Bearing 8 Hours
5. Splitter Gearbox (Fill 1/2 Check
full w/SAE 90W gear lube Daily
6. Rear Deck Pivot Arm 8 Hours
7. Transport Wheel Hub 8 Hours
REF DESCRIPTION FREQUENCY
1. Driveline U-Joints 8 Hours
2. Telescoping Shaft 8 Hours
3. Shield Bearing 8 Hours
4. Gearbox (Fill 1/2 Check
full w/SAE 90W gear lube Daily
5. Caster Wheel Hubs 8 Hours
6. Caster Pivots 8 Hours
7. Blade Spindles 40 Hours
8. Wing Pivot 8 Hours
9. Deck Pivot 8 Hours