Filter
Top Products
8 Installation
MAN0472 (9/23/2005)
Attach Backhoe to Tractor (Continued)
5. Connect tractor 3-point lower lift arms to the
mounting pins on the backhoe. Secure using klik
pin (14) and washers (17). Use washers to take
up slack between klik pin and 3-point arm. See
Figure 7.
6. Connect double top link bar to the tractor top link
bracket. Use top link pin supplied with your tractor
and sleeve (12). If necessary, separate and adjust
top link bars IN or OUT to maintain the backhoe
vertical position. See “Tractor Connections” on
page 11 for tractor top link specifications.
NOTE: Sleeve (12) is for tractors with a 1-inch top
link pin.
7. Torque all hardware to 297 lbs-ft with backhoe
mounted to tractor and stabilizers are raised.
12. 30067 Sleeve, .765 x 1.0 x 1.69
(not shown)
14. 35124 7/16 x 2 Klik pin
17. 28539 7/8 SAE Flat washer
Figure 7. Tractor 3-Point Arm Installed
Figure 8. 3-Point Mount Installed
14
DP1
17