Filter
Top Products
6 Installation
MAN0472 (9/23/2005)
Attach Top Link Bars to Backhoe
1. Attach top link bar (3) to the main frame using cap
screw (8), hardened flat washer (15), and hex nut
(11).
2. Slide double top link (1) over top link bar (3) and
secure using cap screw (10), hardened flat
washer (15), and hex hut (11) through end hole
on double top link. See Figure 3.
NOTE: To estimate the overall length of the two
top link bars; roughly measure from the center of
the tractor top link bracket to the center of the
lower 3-point lift arm pivot as shown in Figure 4.
Final adjustment will be made when backhoe is
attached to tractor.
1. 1007345 Double top link
3. 1012532 Top link bar
8. 12558 3/4 NC x 4-1/2 HHCS GR5
10. 14334 3/4 NC x 3 HHCS GR5
11. 1450 3/4 NC Hex nut
15. 57798 3/4 Hardened flat washer
Figure 3. Top Link Bars Installation
Figure 4. Estimated Top Link Length
1
8
15
11
10
3
15
11
CD6779-3
Estimated
Length
3-Point Pivot
Tractor Top
Link Bracket
Estimated Length
LA1