Filter
Top Products
4 Mount Installation
MAN0530 (6/30/2006)
211718 LOADER MOUNTING KIT
■ Only use 211718 Loader Mounting Kit for
mounting Woods 1009 and 1012 loaders on Mahin-
dra
®
2815 and 3215 tractors. Any other use or mod-
ification of these mounting kits may result in
serious injury or death.
Safety instructions are important! Read all
attachment and power unit manuals; follow all
safety rules and safety decal information. (Replace-
ment manuals and safety decals are available from
your dealer. To locate your nearest dealer, check
the Dealer Locator at www.WoodsEquipment.com,
or in the United States and Canada call 1-800-319-
6637.) Failure to follow instructions or safety rules
can result in serious injury or death.
Always wear relatively tight and belted clothing
to avoid getting caught in moving parts. Wear
sturdy, rough-soled work shoes and protective
equipment for eyes, hair, hands, hearing, and head;
and respirator or filter mask where appropriate
IMPORTANT
■ This equipment must be assembled and
installed on the customer’s tractor by the Woods
dealer. Dealer must thoroughly inspect equipment
and complete each item on the PRE-DELIVERY
CHECK LIST, DELIVERY CHECK LIST, and PROD-
UCT REGISTRATION before equipment is released
to the customer.
■ Clean threaded holes in the tractor chassis
thoroughly, using a tap of the proper size. Paint,
rust, or debris in the threads may not permit cap
screws to be installed and tightened correctly.
CAUTION
Tractor Preparation
For installing this mounting kit, references to right, left,
forward, and rearward directions are determined from
the operator’s position in the tractor seat.
Leave all hardware loose until loader mount is com-
pletely assembled. When assembly is completed,
torque hardware to specifications listed on page 8 of
this manual.
1. Shut off engine and set parking brake during
installation.
2. Remove the tractor front weights and front weight
bracket, if equipped.
As a valued customer, Woods appreciates your comments. Once loader mount and
hydraulic hoses have been installed, please take a few minutes to complete the Loader
Mount Evaluation sheet that was supplied with this mount. Your comments will help us
continue to bring you quality products.