Filter
Top Products
Hydraulic Installation 11
MAN0530 (6/30/2006)
Connect Hydraulic Hoses
1. Remove hydraulic fitting from the PBY port on the
control valve.
2. Install elbow (4) into PBY port.
3. Connect end of hose (1) to the IN, OUT and PBY
ports on the control valve.
4. Route hoses along inside right loader mount.
5. Connect hose (1) from the IN port on the control
valve to the (P) port on the hydraulic manifold.
6. Connect second hose (1) from the OUT port on
the control valve to the (T) port on the hydraulic
manifold.
7. Connect third hose (1) from the PBY port on the
control valve to the (N) port on the hydraulic
manifold.
1. 1014619 Hose, 36" x 9/16 JICF x 9/16 JICF
4. 63558 9/16 JICM x 9/16 ORBM 90°
Figure 18. Hydraulic Hose Installation - Control Valve
Figure 19. Hydraulic Hose Installation
Hydraulic Manifold