Filter
Top Products
10 Hydraulic Installation
MAN0530 (6/30/2006)
Install Hydraulic Fittings to Tractor
IMPORTANT
■ Incorrect installation can damage tractor
hydraulic system. Read and understand
instructions in tractor manual before connecting.
1. Locate the hydraulic manifold block on the right
side of the tractor chassis, below and in front of
the operator’s platform.
2. Remove three hex head pipe plugs from manifold
block ports.
NOTE: Use thread sealant on all pipe thread
connections and tighten securely to prevent
leaks.
3. Install adapters (2) and elbows (3) into the T
(RETURN), N (PBY), and P (PRESSURE) ports
on the hydraulic manifold. See Figure 16.
4. Position elbows to point up and slightly to the
front.
2. 315045 Adapter, 3/8 BSPTM x 3/8 NPTF
3. 44552 Elbow, 3/8 NPTM x 9/16 JICM 45°
Figure 15. Tractor Hydraulic Manifold
Figure 16. Hydraulic Fittings Installed
Figure 17. Hydraulic Fitting Installation
DP5
T
P
N
DP6
2
3