Filter
Top Products
9
THROTTLE LEVER AND CHOKE LEVER
Figure 7
PARKING BRAKE
The Parking Brake Pedal is located on the left running board next to the Control Tower. (See Figure 8) It is used
to engage the Parking Brake. Engage the Parking Brake when the unit is not in use.
.
Figure 8
DRIVE HANDLES
The Drive Handles (Left and Right) are located at the top of the Control Tower. (See Figure 8) The drive handles
are used to move, (propel) steer and stop the Z-series. The drive handles will return toward the neutral position
without driver input. However, the driver should place the Drive Handles in the neutral position. Unless the Drive
Handles are placed in the neutral position the Z-Series may creep. When the Drive Handles are in the neutral
position the unit does not move.
Choke Lever
Throttle Lever
FRONT
ON
OFF
Left Control Panel
Drive
Handles
Brake Pedal
Indicator
Panel
Parking Brake
Handle