Filter
Top Products
33
Figure 21
Note: If after a number of attempts to level the mower deck fails to succeed, adjust the retaining arm to their
original lengths of 11.125 inches. (See Figure 22)
Figure 22
REMOVING THE MOWER DECK
WARNING:
The cutting blades of the mower deck are sharp and can cause injury.
1. Position the Z-series on a hard, flat surface.
2. Engage the Parking Brake.
3. Move the lift handle to the L position.
4. Remove the wing nuts and then remove the belt covers.
If Mower Deck is: Then:
48” or 54” Remove one wing nut for each
cover. (See Figure 23)
Hanger Bracket
A
Hanger Links
11.125” Starting Length