Filter
Top Products
Specifications
8
MODEL
AIR COOLED
MT (20.0 HP)
MTEFI (26.0 HP)
LIQUID COOLED
MTL (25.0 HP)
BLADE DRIVE
PTO Shaft Quick Disconnect Splined
Shaft with Two High-Speed
U-Joints
Quick Disconnect Splined
Shaft with Two High-Speed
U-Joints
Blade Spindle Each Blade (2) Mounts Direct
on Peerless Right Angle
Gearbox with Tee Gearbox
in Center Connected to PTO
Shaft (Complete Geared
Drive, Peerless Model 1000
Gearboxes)
Each Blade (2) Mounts Direct
on Peerless Right Angle
Gearbox with Tee Gearbox
in Center Connected to PTO
Shaft (Complete Geared
Drive, Peerless Model 1000
Gearboxes)
Blade Drive Clutch and Brake Manual Belt Tightener Clutch
and Band Brake (Stops
Blades within Five (5)
Seconds of Disengagement)
Manual Belt Tightener Clutch
and Band Brake (Stops
Blades within Five (5)
Seconds of Disengagement)
Max. Blade Speed
[22 in. (56 cm) Blade]
@ 3600 RPM Engine
2900 RPM
[16700 FPM (5090 m/min)]
2900 RPM
[16700 FPM (5090 m/min)]
TIRE SIZE
Deck Caster Wheel 2.80/2.50-4 Pneumatic (4-Ply) 2.80/2.50-4 Pneumatic (4-Ply)
Deck Caster Wheel (Optional) 8.25 x 2.75 Semi-Pneumatic 8.25 x 2.75 Semi-Pneumatic
Drive 18 x 9.50-8 (4-Ply) 18 x 9.50-8 (4-Ply)
Rear (Dual) 13 x 5.00-6 (4-Ply) 13 x 5.00-6 (4-Ply)
TIRE PRESSURE
Deck Caster Wheel 20 PSI (137 kPa) 20 PSI (137 kPa)
Drive 15 PSI (103 kPa) 15 PSI (103 kPa)
Rear 20 PSI (137 kPa) 20 PSI (137 kPa)
DIMENSIONS (Tractor and Mower)*
Length 91 in. (231 cm) 91 in. (231 cm)
Width 49 in. (124 cm) 49 in. (124 cm)
Height 44 in. (112 cm) 44 in. (112 cm)
Wheel Base (Tractor) 42-1/4 in. (107 cm) 42-1/4 in. (107 cm)
Tread Width (Tractor) 29-3/4 in. (76 cm) 29-3/4 in. (76 cm)
* See note under CURB WEIGHT
MOWER DECK
Width of Cut SD/GHS 42 or 48 in. (107 or 122 cm) 42 or 48 in. (107 or 122 cm)
Cutting Height 1 to 4 in. (3 to 10 cm) 1 to 4 in. (3 to 10 cm)
Height Adjustment 7 Positions - 1/2 in. (1 cm)
Increment Hitch Pins Installed
in Multi-Position Deck Support
7 Positions - 1/2 in. (1 cm)
Increment Hitch Pins Installed
in Multi-Position Deck Support