Filter
Top Products
Getting Started
The wireless rain sensor system is designed for easy installation, setup and years of trouble-free
operation. In most cases, the system components can be installed and fully operational within
minutes. All you will need is a Phillips screwdriver and basic do-it-yourself skills.
If you have problems with any portion of the installation, or the product does not seem to function
properly, refer to the Troubleshooting section on page 22 first. If the problem is not listed, or the
remedy does not help, call Toro Irrigation at 1-951-688-9221 or contact your local Toro
distributor for assistance. For more information on this and other Toro irrigation products, visit
the Toro web site at www.toro.com.
Here’s all there is to it:
2
The receiver is installed and connected to
your irrigation system controller. See page 5.
Step 1
The sensor and receiver are tested at close
range to verify operation. See Page 8.
Step 2
373-0372a_E/S/F 6/7/05 1:59 PM Page 2