Filter
Top Products
17
English
Signal Strength Display
This feature displays sensor signal strength on a digital scale ranging from 0.0 to 10.2.
1. Press the Setup button as needed to display the antenna icon and the
digital readout. The display will indicate the strength of the last received
signal. See Figure 22.
Important: A signal strength value less than 2.0 is may cause
inconsistent operation. Relocate the sensor as needed to increase the
signal strength. See “Troubleshooting” on page 22 for additional information.
Battery Strength Display
This feature displays sensor battery strength on a bar scale. The strength of the battery is indicated
by the height of the bar stack: No bar = a dead battery to six bars = full strength.
1. Press the Setup button as needed to display the Battery icon and
the bar scale. See Figure 23.
Note: If the Battery icon is flashing, low battery strength is indicated
and replacement is recommended.
See “Sensor Module Battery Replacement” on page 21.
Figure 22
Figure 23
373-0372a_E/S/F 6/7/05 1:59 PM Page 17