Vita Spa L100 Hot Tub User Manual


 
PAGE 24
SPA LIGHT COLORED LENS REMOVAL
In your owners packet you will find
colored lenses for your spa light. They
can easily be installed or removed by
placing them over the spa light and
gently pushing on the outer edges to
install and pulling along the edges to
remove.
LIGHT BULB REPLACEMENT
1. Turn off the power to the spa.
2. Remove the front panel of the spa.
3. Locate the spa light.
4. Turn the bulb counter - clockwise 1/4
turn to remove from its socket
5. The replacement bulb is locked into
place by turning it clockwise 1/4 turn
6. Close up the cabinet and turn the
power back on.
7. Check the Top Side display and adjust
the time.
DIVERTER VALVE
Over a period of time sand or grit may
intrude into your spa. The diverter valves
may become difficult to turn. It is import a n t
that the debris be removed as soon as
possible to avoid damage to the valve.
1. Turn off the power to the spa.
2. Remove the diverter handle by
pulling upward and gently rocking it.
3. Grasp the collar and turn it counter-
clockwise.
4. Lift the valve body up.
5. Wipe the valve body and interior walls
of the valve with a soft cloth.
6. Inspect the valve and valve walls for
any grooves caused by the debris.
7. Using a fine grit sandpaper, smooth
down any deep furrows.
8. Wipe the valve and wall down with a
damp cloth and remove any debris
left behind.
9. Lubricate the valve body with a
waterproof lubricant.
10.Reassemble the valve and restore the
power to the spa.
11.Check the Top Side display and adjust
for time.
S PA MAIN T E N A N C E
S PA LIGHT
LIGHT BUL B