Filter
Top Products
PostScript Picture
DM Logo5-cmykTXT-LC10.eps
PAGE 5
INSTA L L AT I ON INST R UCT I ONS
SITE SELECTION / PRE PA R AT I O N :
The spa must be installed on a
structurally strong, solid and reasonably
level surface. The majority of the weight
of the spa is placed under the footwell
area of the spa. This area must be firmly
supported at all times. The site should
allow for drainage away from the
equipment compartment in which the
electrical components are housed. Take
into account the following when
considering prospective sites.
Vita Spas have a loading capacity in the
range of 57lbs/sq ft to 83 lbs/sq ft.
Refer to your actual model for exact
loading requirements.
LOCAL CODES:
There may be certain restrictions and/
or requirements that are particular to
your locality.
DELIVERY PASSAGEWAY:
Doors, halls, stairs, etc. may pose
obstructions to deliver the spa to its
intended site.
MAINTENANCE:
Trees, lawn, placement surfaces, etc. can
create extra work in keeping your spa area
clean and safe. Please be advised that
placing your spa on dirt or grass may
increase the amount of debris inadvert e n t l y
brought into the spa water on the feet of
users or by the wind. The intrusion of this
debris into the spa water may cause harm
to your equipment as well as the spa
s u rface and is not covered under warranty.
PRIVACY AND
WIND SHIELDING:
A sheltered environment can result in
lower operating and maintenance costs.
You may also want to take into
consideration your privacy during times of
the year when trees may be barren, having
the spa located where you have a view of
a peaceful sunset, where you may be able
to catch soothing breezes, or your view
and the view of your neighbors may also
be something that you should address
prior to the final installation of your spa.