Filter
Top Products
PostScript Picture
DM Logo5-cmykTXT-LC10.eps
PAGE 15
Note that for safety, all jet modes will
automatically turn off after 30 minutes.
Reactivate any therapy mode as
indicated above.
C. (OPTIONAL) AIR INJEC T I O N
THERAPY AIR BUTTON
This option equips your spa with an air
therapy blower. Press the air button to
activate and de-activate the air therapy
b l o w e r. For safety, the blower will
automatically turns itself off after 30
minutes.
D. TURNING ON THE LIGHT
Your spa is equipped with an underwater
light. Press the light button to activate
and de-activate the light. If left on, the
light will automatically turns itself off after
3 hours.
SPECIAL FEATURES
A. AUTOMATIC BLOWER AND JETS
PURGE
Once each day, at 10 AM the jet
pump(s) will automatically run for one
minute to circulate potential stale water
in the piping. This is a normal function of
the spa. The display will show “BJ2P”
while this takes place.
B. MEMORY
All settings that are entered into your spa
controller will be permanently retained in
its solid-state memory. In the event of a
power failure, the time will be captured
and held until power returns. All settings
existing at the time of the power failure
will be restored when power returns.
feature to operate for 30 minutes each
morning and afternoon for a total of 1
hour each day.
1. Press and hold “PROG” until “AH”
flashes.
2. Press “PROG” three times to show
“SA=1” which is the factory setting.
3.
Pressing the “UP” or “DOWN”
arrows, you can change the skim-away
tim to 2, 4, or 6 hours each day.
The total selected time will be split
between morning and afternoon.
USING YOUR SPA
A. DISPLAYING TIME OR
TEMPERATURE
Pressing the “PROG” button will switch
the display between current time and
current water temperature.
B. WATER JET THERAPY
Your spa is equipped with one or two
therapy pumps that can be activated as
follows.
Jet Button:
SINGLE PUMP SYSTEM
1. Press “JET” to activate the Relaxation
Therapy mode.
2. Press “JET” to activate the Power
Therapy mode.
3. Press “JET” to turn pump off
DUAL PUMP SYSTEM
1. Press “JET” to activate the Relaxation
Therapy mode.
2. Press “JET ” to activate pump#1
Power Therapy mode.
3. Press “JET” to activate pump #2
Power Therapy mode.
4 Press “JET” to de-activate pump #1.
5 Press “JET” to de-activate pump #2.