Filter
Top Products
CARE & CLEANING
24
Please refer to page 20 for troubleshooting the installation of the Treatment Head.
Troubleshooting
The Issue
The treatment
cycle will not start
Device shuts off
in cycle
The audio signals: 5 beeps
The Information Display signals:
The Information Display signals:
The audio signals: 3 beeps
The Treatment Head Indicator Light displays:
The Information Display signals:
The audio signals: 3 beeps
The Treatment Head Indicator Light displays:
Battery will not hold a charge
Device will not turn on
Treatment head may not be
attached, or the Treatment
head is defective
Properly and fully attach
treatment head.
Replace the treatment head.
Recharge the battery.
Order a replacement battery.
Charge battery
The treatment head
has no remaining
treatment cycles
The battery is low
The battery needs to
be replaced
The device needs
to cool down
The device is too
hot to operate
Set the device aside
and let it cool down.
Set the device aside until it
reaches room temperature.
Set the device aside until it
reaches room temperature.
The battery is dead
The Problem The Solution
The audio signals: 10 beeps
The Information Display signals:
The audio signals: 10 beeps
The Information Display signals:
The audio signals: 5 fast beeps
The Treatment Head Indicator Light displays:
The device is too
cold to operate