Filter
Top Products
CARE & CLEANING
16
Getting Started
Before you use the ClearWave
®
Phototherapy System, you will need to install the
battery (see page 21 - How to replace the battery) and fully charge the device. It
takes approximately 12 hours to fully charge the battery for the first time.
Instructions, Operation and Directions for Use
Step 1
Step 2
Step 3
Step 4
Step 5
Step 1 Connect the power adapter
to the Charging Stand and
the adapter into a 110 VAC
grounded electrical outlet.
Step 2 Place the ClearWave
Phototherapy System for Acne on
the Charging Stand as shown.
Step 3 The battery life indicator lights
will provide information to you
on the status while charging.
Step 4 When all 3 battery indicator lights
are illuminated, the battery is fully
charged and the device is ready for
use. Once fully charged, the indicator
lights will illuminate for 3 minutes,
and then turn off.