Filter
Top Products
unigreen 15
4.12 MIXING
The active principle can be mixed using the relevant stirrers before and
during the treatment. Correct mixing and stirring is the basis of the correct
distribution on the crops. We recommend some useful accessories such as
the premixer for powders and liquids (see the following paragraph).
The machines in the Airdrop-MFC range can be equipped with 2 hydro-
pneumatic agitators, supplied by the relevant taps in the auxiliaries taps block
(paragraph 4.9).
o mix the product in the tank run the stirrer (or ejector) for roughly 10-15
minutes at the maximum pressure available
4.12.1MANUAL PREMIXING
Dilute the active principle by hand before introducing it into the tank, (you
must wear suitable protective clothing such as rubber gloves, a mask or
goggles, overalls, etc.).
WARNING: the indications to follow for using chemical products are indicated
in paragraph 2.2.1.
4.12.2PREMIXER ON COVER (OPTIONAL):
Open the cover and pour all of the chemical powder into the filter, close the
cover and open the supply tap until all of the powder has dissolved.
4.12.2PREMIXER ON COVER (OPTIONAL):
Open the cover and pour all of the chemical powder into the filter, close the
cover and open the supply tap until all of the powder has dissolved.
4.12.4COVER WASHER FOR CHEMICAL CONTAINERS
The washer for chemical containers (FIG.15) is installed as standard in the
hatch on the entire Airdrop-MFC range.
To wash the container, proceed as follows:
-Lift the cover of the tank
-Open auxiliary tap (D) of the pressure regulator (see paragraph 4.8.1)
supplying it with a pressure of under 8 bar
- Introduce the tin into the hopper, inserting the washing pipe into the tin.
-Press the tin onto the pipe until it has been washed clean.
-At the end of the operations close the tap (D) of the pressure regulator
again.
FIG. 13
FIG. 15
Box washing device on cover