Filter
Top Products
26 se c t i O n 7— se r v i c e26 se c t i O n 7— se r v i c e
To place the new belt, begin by routing the belt around the 5.
two outer spindle pulleys as shown in Fig. 7-7.
Then route the belt around the two deck idler pulleys as
shown in Fig. 7-7.
Retighten the left idler pulley hex nut loosened earlier.7.
Remount the belt guards removed earlier.8.
Re-install the deck, making sure the belt remains routed
around the pulleys as instructed. See Fig. 7-8.
While holding the belt and pulley together, rotate the
pulley to the left. Continue holding and rotating the pulley
Changing the Transmission Drive Belt
NOTE: Several components must be removed and special tools
See an authorized Troybilt Service Dealer to have your drive belt
replaced or phone Customer Support as instructed on page 2 for
information on ordering a Service Manual.