Filter
Top Products
Throttle Control Lever
The throttle control lever is located on the right side of the
and, when pushed all the way forward, the choke control also.
When set in a given position, the throttle will maintain a uniform
When operating the tractor with the cutting deck
engaged, be certain that the throttle lever is always in the FAST
(rabbit) position.
Ignition Switch
To start the engine, insert the key into the ignition switch and
turn clockwise to the START position. Release the key into the
headlights will be activated in the Normal (and Reverse Caution
Modes).
To stop the engine, turn the ignition key counterclockwise to the
Never leave a running machine
into neutral position, set parking brake, stop engine
and remove key to prevent unintended starting.
section of this manual for detailed instructions regarding the
Ignition Switch Module and operating the tractor in REVERSE
Deck Lift Lever
change the height of the cutting deck. To use, move the lever to
the left, then place in the notch best suited for your application.
Speed Control Lever
The speed control lever, located on the left rear fender, controls
the ground speed of the lawn tractor as well as the direction of
To drive forward or in reverse, slowly move the speed control
To stop
When mowing, place the speed control lever in the “Cutting
Note: Do not use the parking brake pedal to control the ground
speed of the lawn tractor. Always use the speed control lever
to slow the ground speed of the lawn tractor. Depressing the
parking brake pedal with the speed control lever engaged as
part of regular operation will result in premature wear of the
drive belt.
Do not attempt to change the direction of travel
transmission could result. Always bring the tractor to a complete
stop before moving the speed control lever from forward to
reverse or vice versa.
FAST
SLOW
CHOKE
Stop
position
Start
position
Indicator
Light
Reverse
Push
Button
Normal
Driving
Mode
Reverse
Caution
Mode
Position
13se c t i O n 4 — cO n t r O l s a n d fe a t u r e s