18 se c t i O n 5— Op e r a t i O n18 se c t i O n 5— Op e r a t i O n
Moving The Tractor Manually
valve for occasions when it is necessary to move the tractor
manually. Activating this valve forces the fluid in the transmission
To engage the hydrostatic relief valve, proceed as follows:
Locate the hydrostatic bypass rod in the rear of the tractor.
See Fig. 5-2.
2.
it in place.
NOTE:
bypass rod is pulled out. Return the rod to its normal position
prior to operating the tractor.
Never attempt to move the tractor manually
without first engaging the hydrostatic relief valve. Doing so will
Headlights
position.