Filter
Top Products
Service
7
23
Service
7
23
Move the deck lift lever into the top notch on the right 7.
fender to raise the deck lift arms up and out of the way.
Remove the bow-tie cotter pin and flat washer securing the 8.
deck stabilizer rod to the deck. Slide the deck lift rod from
the mounting weldment on the deck as seen in Fig. 7-3.
Cutting Deck Removal
To remove the cutting deck, proceed as follows:
(Blade Engage)
position and engage the parking brake.
Lower the deck by moving the deck lift lever into the 2.
bottom notch on the right fender.
3.
engine pulley, by removing the self-tapping screw (A) that
Note: Make a mental note what hole the other end of the belt-
keeper rod is inserted in for reinstallation purposes.
Looking at the cutting deck from the left side of the tractor, 5.
release handle and carefully release the deck from the deck
lift arm.
A
B
C