Filter
Top Products
10
USING THE EDGER ATTACHMENT
The Edger Attachment makes clean, sharp edges next to walkways, driveways, paths, planted areas,
patios, etc. See
Assembly Steps, STEP 4: in Section 2 for instructions on attaching this attachment.
Take your time when edging. Decide how far away the edge is to be from the walk or drive, then
slowly proceed using the walk or drive as your sight line.
Other attachments are can be purchased separately. See
Attachments below for more details.
Section 4: Operation
Tilling Patterns
1. When preparing a seedbed, go over the same path twice in
the first row, then overlap one-half the machine width on each
successive pass (Figure 10).
2. After going up and down the rows in one direction, make
second passes at a right angle across the original passes
(Figure 11). Again, overlap each pass to thoroughly pulverize
the entire seedbed area. In very hard ground, it may take three
or four passes before the desired depth is achieved.
3. If your garden is not wide enough to till lengthwise and then
crosswise, then first overlap by one-half the machine width,
followed by successive passes at one-quarter machine width.
This overlapping method assures thorough tilling.
Figure 10: Use an overlap
technique on every pass.
Figure 11: Make a second set
of passes at a right angle over
the first set of passes.
Power Lawn Rake Attachment –
OEM-290-263 / 290-263-081
The Power Lawn Rake will help
keep your lawn healthy and
vigorous. Matted grass and
debris not only looks
unattractive, but stifles
lawn growth and overall
health. This attachment
mounts without tools and
features dozens of tem-
pered steel “fingers” that
spring off the surface to pene-
trate and loosen matted grass
without disturbing root growth. An 18"-
wide swath covers a large lawn area quickly.
Lawn Aerator Attachment –
OEM-290-264 / 290-264-081
Helps promote healthy, dense
lawns by aerating and loos-
ening the soil to contribute
to better root growth. Four
tempered steel tines punc-
ture the surface of the
lawn, letting nutrients
more easily reach the
roots. Assembles
without tools. When
mounted, it takes the place of
the standard tine sections.
ATTACHMENTS
The following Tiller/Edger attachments are available where the Tiller/Edger was purchased. See your authorized dealer or contact the
Factory for details.