Filter
Top Products
Power Supply:
1.5A On/Off Switch/Circuit Breaker – Main Power Input
3.15A Fuse (Slow-Blow) – Field Output
Mother Board: 3.15A Fuse
Line Voltage: 100, 220 or 240 VAC 50/60 Hz, 98 VA
Current Draw (no load): 0.21A @ 100-120 VAC, 60 Hz or 0.10A @ 200-240 VAC, 50 Hz
Current Draw (maximum load): 0.91A @ 100-120 VAC, 60 Hz or 0.45A @ 200-240 VAC, 50 Hz
Current Load: 28 VAC
Maximum Current Available for Load: 3.15A (90 VA)
Maximum Load Per Station: 0.0036A (0.01 VA)
Operating Temperature: -10°C to +60°C (14°F to 140°F)
Storage Temperature: -30°C to +65°C (-22°F to 149°F)
Radio complies with FCC Part 22 and Part 90 of the FCC Rules
Domestic: This equipment has been tested and found to comply with the limits for a FCC Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. The equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to the radio communications. Operation in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Electromagnetic Compatibility
Controller Specifications
Fuse & Circuit Breaker Specifications
© 2007 The Toro Company, Irrigation Division • An ISO-9000-Certified Facility Form Number 373-0379 Rev. C