Toro TDC-100/200 Sprinkler User Manual


 
Syringe - Choose Syringe to activate all the stations in a selected irrigation program for a specified runtime.
Note: The Maximum number of simultaneous stations set in the program still applies.
Manual Syringe Activation Directions
Syringe activation example: Manually activate all the stations in Program 3 for 2 minutes each.
Note: An irrigation program must be configured to activate Manual Syringe.
1. Press the Manual Watering Key .
2. The cursor should be located in the Manual field. Use the Input Dial to select Syringe.
3. Press the Down Arrow to advance the cursor to the Runtime: field. Use the Input Dial to
select the correct value of the runtime in minutes. For this example, set the value to 02 minutes.
Note: The Runtime setting in Syringe will not affect the actual runtime in the program.
4. Press the Down Arrow to advance the cursor to the Program: field. Use the Input Dial to
select the correct program to syringe. For this example, select program 03.
5. Once finished, press the Start Key to activate or press the Home Key to cancel and revert back to
the default display.
Note: Pressing the Home Key will save the entered values.
When finished, the display should read:
Start Program - Select Start Prog to activate a watering program regardless of its set start time.
Manual Program Activation Directions
Start Program example: Manually activate Program 08.
Note: An irrigation program must be configured to activate Manual Program. A program on hold can still be
manually activated.
1. Press the Manual Watering Key .
2. The cursor should be located in the Manual field. Use the Input Dial to select Start Prog.
3. Press the Down Arrow to advance the cursor to the Program: field. Use the Input Dial to
select the correct program value. For this example, select program 08.
4. Once finished, press the Start Key to activate or press the Home Key to cancel and revert back to
the default display.
Note: Pressing the Home Key will save the entered values.
When finished, the display should read:
Manual: Start Prog
Program: 08
Press START to water
Manual: Syringe
Runtime: 02 min
Program: 03
Press START to water
1155