Filter
Top Products
Model T265 Chemiluminescence Ozone Analyzer Addendum to Model T200 Manual Specifications, Approvals, &
Certifications
11
2.1 EPA DESIGNATION
Teledyne API’s Model T265 Chemiluminescence Ozone Analyzer received EPA
approval for Designation
EQOA-0611-199. The designation will be considered valid
when operated under the following conditions:
on any full scale range between 0-100 ppb and 0-1000 ppb
with any range mode (Single, Dual, or AutoRange)
at any ambient temperature in the range of 5°C to 40°C
with a TFE filter in the sample air inlet
with a sample flow rate of 500 ± 50 cm3/min (sea level)
with the dilution factor set to 1
with Temp/Press compensation ON
in accordance with the appropriate associated instrument manuals
with or without any of the following options:
Internal or external sample pump
Sample/Cal valve option
Rack mount with or without slides
Analog input option
4-20 mA isolated current loop output
2.2 APPROVALS AND CERTIFICATIONS
The Teledyne - API Model T265 analyzer was tested and certified for Safety and
Electromagnetic Compatibility (EMC). This section presents the compliance
statements for those requirements and directives.
2.2.1 Safety
IEC 61010-1:2001, Safety requirements for electrical equipment for measurement,
control, and laboratory use.
CE: 2006/95/EC, Low-Voltage Directive
North American:
cNEMKO (Canada): CAN/CSA-C22.2 No. 61010-1-04
NEMKO-CCL (US): UL No. 61010-1 (2nd Edition)
2.2.2 EMC
EN 61326-1 (IEC 61326-1), Class A Emissions/Industrial Immunity
EN 55011 (CISPR 11), Group 1, Class A Emissions
FCC 47 CFR Part 15B, Class A Emissions
CE: 2004/108/EC, Electromagnetic Compatibility Directive
2.3 WARRANTY
Refer to the Model T200 operation manual regarding the Warranty policy for the
Model T265.
07337B DCN6324