Swim'n Play 420745-15 Swimming Pool User Manual


 
Wall guard is optional.
Tape wall guard (plastic sheeting) to pool wall 12" up from ground
and smooth out on ground 12" from wall. This will protect your
pools metal parts from chemical reactions with the soil used in
the earth mound.
Several commercial products can also be used in place of
earth mound. Consult your professional pool dealer.
18
EARTH MOUND
18
Build earth mound on top of wall
guard using screened damp earth or
pre-washed sand.
Shape and compact earth mound to
run 8" up from ground and 8" away from the wall.
Build a 2" mound on top of the bottom straps and hold
down sheets to protect your liner from metal edges of the strap.
Do not use any material that will compress under pressure
for the earth mound is an important part of the pool installation.
It prevents the wall from lifting up and from the liner sneaking
underneath the pool wall.
MANUFACTURER CAN NOT ASSUME THE RESPONSIBILITY
OF THE PERFORMANCE OF THIS PRODUCT IF THE EARTH
MOUND IS OMITTED OR NOT PROPERLY INSTALLED.
DANGER
DO NOT USE ANY MATERIAL THAT
WILL COMPRESS UNDER PRESSURE
FOR THE EARTH MOUND.
SEE INSTRUCTIONS TO LEFT.
EARTH
MOUND
8”
8”
OPTIONAL
WALL
GUARD
12”
12”