Filter
Top Products
13
The screws joining the straps must be inserted from the top to prevent the screw putting a
hole in the liner once the pool is filled with water.
STRAP ASSEMBLY FOR SLIM STYLE OVAL POOLS
SIZES
12’ x 8’
15’ x 10’
16’ x 10’
18’ x 12’
24’ x 12’
5/16” - 18 x 1/2”
Hex Head Screws
5/16” - 18 Hex Nuts
Hold Down
Plates
Hold Down
Plates
Straps
5/16” - 18 x 1/2”
Hex Head Screws
5/16” - 18 Hex Nuts
Hold Down
Plates
Hold Down
Plates
Straps
5/16” - 18 x 1/2”
Hex Head Screws
5/16” - 18 Hex Nuts
Hold Down
Plates
Hold Down
Plates
Straps
SIZES
24’ x 15’
30’ x 15’
SIZES
33’ x 18’
Dig a 1” deep straight line to insert the
front lip of the Hold Down Plates.
Assemble the Hold Down Plates on top of
the Bottom Supports overlaying them so
that the four holes on each end match the
four holes from the Bottom Support as
shown on image H.
The front lip must face down into the
ground. It must not face up.
Insert the four 5/16” - 18 x 1/2” hex head
bolts and nuts and tighten.
H
1” Deep Trench