Filter
Top Products
8.5 Jets 2 - On models with two jet pumps, JETS 2 controls the
high-speed pump #2.
Auto Turn Off — Anytime a pump has been manually turned on, it will
automatically turn off after approximately 20 minutes. If at this time you
desire more jet operation you may simply turn the pump(s) back on.
Page 13
Select
Cycle
Mode
Display
Figure-D, Command Center
These display temperature
setting and increase or decrease
temperature setting and other
programmable features.
Inverts the
main 4-digit
display.
Controls the hot tub
light (bright, dim,
dimmer, off).
Controls the air
blower (On,
Off).
Controls pump #1
(On, Off).
Controls pump #2
(N/A Capri).
Switches between
standard and economy
skimming/heating modes.
(page 24).
Accesses skim-
ming/heating cycle
program mode.
Scrolls menu through
skimming/heating cycle
programming features.
Displays time of day and
initiates time setting and
locking functions.
Indicates panel, set
temperature or
skimming/heating cycle
programming is locked.
Indicates heater is on.
(page 11).
Indicates optional ozone
generator is on (page 35).
Indicates pump #2
is on (N/A Capri).
Indicates pump #1 is
on (flashes during
auto operation).
Indicates air injec-
tor system is on.
Indicates hot tub light
is on (changes accord-
ing to brightness
selected).
These characters identify
what is being shown on the
main 4-digit display
Figure-E, LCD Display
Indicates operating
mode selected (page
24).
ENGLISH
Indicates skimming/heating
cycle in progress or displays
cycle programming features
(page 25).