Filter
Top Products
BOOM PERSONNEL LIFT
This equipment is designed and manufactured in
compliance with the duties, responsibilities and
standards set forth for manufacturers in the ANSI 92.2
standard at the time of manufacture.
This equipment will meet or exceed applicable OSHA
and ANSI codes and standards when operated in
accordance with sections 7, 8, 9 and 10 of ANSI A92.2
and all other manufacturer’s recommendations.
It is the responsibility of the user to follow all ANSI,
OSHA, federal, state and local codes and regulations
that govern the safe operation of this equipment.
Obtain, read and obey all safety precautions before
performing maintenance or repairs or attempting to
operate this equipment. This includes all
manufacturer’s recommendations as well as those
directives set forth by ANSI, OSHA, federal, state and
local authorities.
To ensure proper and safe use of this equipment, it is
strongly recommended that only trained and authorized
personnel attempt to operate and maintain the boom lift.
This manual shall be considered a permanent and
necessary component of the machine and shall be kept
with the boom lift at all times.
Bil-Jax, Inc. is dedicated to the continuous improvement
of this and all Bil-Jax products. Therefore, equipment
information is subject to change without notice. Direct
any questions or concerns regarding errors or
discrepancies in this manual to the Bil-Jax Service
Department.
Copyright © Bil-Jax, Inc. 2006. All Rights Reserved.
“Bil-Jax” is a registered trademark and “A Step Above”
and “Summit Series” are trademarks of Bil-Jax, Inc.
Contact Bil-Jax for replacement manuals.
First Printing: March 2006
125 Taylor Parkway
Archbold, Ohio 43502
Phone (800) 537-0540
(419) 445-8915
Fax (419) 445-0367
http://www.biljax.com