Filter
Top Products
Machine-Side Hopper Loaders
Assembly instructions 4-1
4. Assembly instructions
M These installation instructions are intended for persons with skills in electrical
and mechanical areas due to their training, experience and received
instructions.
Personnel using these installation instructions must be instructed in the
regulations for the prevention of accidents, the operating conditions and
safety regulations and their implementation.
Ensure in each case that the personnel are sufficiently knowledgeable about
the equipment.
The installation instructions provided in the corresponding operating
instructions apply for all connected equipment.
Please observe all safety regulations for the operation of lifting gear.
All installation work must be carried out with the equipment disconnected from
electrical power and compressed air supply.
L For installation work taking place at heights of over approx. 6 feet, use only
ladders or similar equipment and working platforms intended for this purpose.
At greater heights, the proper equipment for protection against falling must be
used.
Use only suitable lifting gear that is in proper working order and load
suspension devices with sufficient carrying capacity. Do not stand or work
under suspended loads!
Use only suitable workshop equipment.
F Install the equipment so that all parts are easily accessible; this facilitates
maintenance and repair work.