Filter
Top Products
Machine-Side Hopper Loaders
Safety instructions 2-5
2.2. For the operating safety of the equipment
Never change settings if the consequences are not precisely known.
Use only original manufacturer-approved spare parts.
Please observe the maintenance schedule.
Keep record of all maintenance and repair work.
Please note that electronic components may be damaged by static discharge.
Check all electrical connections for proper fit before the equipment operated for the first
time and at regular intervals.
The operating temperature range is 32 to +113 °F (0 °C to +45 °C).
The recommended storage temperature range is -13 to +131 °F (-25 °C and +55 °C).
Write down all data that you have entered into the control system.
Please ensure that all plugs are correctly plugged in.
The operating instructions of the connected machines must be followed.
Operate the device only if all its components are grounded.
Never adjust sensors without exact knowledge of their function.
Please note that a compressed air supply is required for the operation of the active
cleaning option.
Compressed air supply for the active cleaning option should not exceed 87 PSI (6 bar)
(active cleaning option only).
Align the suction tubes correctly.
The unit should be installed in such a way that the outlet flap swings at right angles to
the moving direction of the equipment.
The load-bearing capacity of the machine flange should be adhered to.
A level indicator is required when conveying from granulators.