DS11 User Manual ◄ 17
Take-up HandleRivet Spinner
Crank
Figure 19. Centering the Rivet Hub
5. Apply a few drops of oil to the rivet hub (Figure 20).
Figure 20. Applying the Oil
6. Turn the spinner crank while slowly running the take-
up handle inward (approximately one full revolution)
until the rivet head is formed (Figure 21).
NOTE:
The take-up handle provides pressure while the
spinner anvil forms the rivet head.
Figure 21. Forming a Rivet Head
NOTE:
The rivet spinner is equipped with oiling chambers and
should be maintained periodically with a light-weight oil
(Figure 22).
Figure 22. Spinner Oiling Chambers
MAINTENANCE & ADJUSTMENTS