DS11 User Manual ◄ 13
2. Always maintain a high chain speed. High chain
speeds produce the best results.
3. Avoid aggressive/heavy plunge forces. Aggressive
plunge force creates spalling of the concrete when
the saw bar and chain exits and causes premature
bar and chain wear.
COLD WEATHER OPERATION
If the saw is to be used during cold weather, preheat the
hydraulic uid at low power source speed. When using
the normally recommended uids, uid should be at or
above 50 °F/10 °C (400 ssu/82 centistokes) before use.
Damage to the hydraulic system or chain saw can result
from use with uid that is too viscous or thick.
OPERATION