Filter
Top Products
28 www.ferrisindustries.com
Installation
Weight Mount Installation
(IS1000Z Series)
Install Weight Carriers
1. Install the left-hand and right-hand weight carriers
(E & H, Figure 47), bar clamps (F) and fasten with
the 5/16-18 x 2-1/2” bolts (B) and 5/16-18 nylon
lock nuts (G). Make sure carriers are tight against
the outside of the suspension arm and do not
interfere with the shock/spring assembly. Tighten
securely.
2. Install the counter weights (A) in the weight carrier
and secure with the clevis pins (D) and hair pin
clips (C).
Figure 47. Install Weight Carriers
A. Weight
B. 5/16-18 x 2-1/2 Bolt
C. Hairpin Clip
D. Clevis Pin
E. Weight Carrier-LH
F. Bar Clamp
G. 5/16-18 Nylon Lock Nuts
H. Weight Carrier-RH
B
A
A
C
B
D
E
F
F
G
G
H
D
C