Filter
Top Products
31
Regular Maintenance
Ground Speed Control Lever Adjustment
The control levers can be adjusted in three ways. The
alignment of the control levers, the placement of the
levers (how close the ends are to one another) and
the height of the levers can be adjusted.
To Adjust the Handle Alignment
Loosen the mount bolts (A, Figure 27) and pivot the
lever(s) (B) to align with each other.
To Adjust the Handle Placement
Loosen the jam nuts and adjust the placement bolt
(C, Figure 28) in or out to properly adjust the lever
end spacing.
To Adjust the Handle Height
Remove the mounting hardware and reposition the
handle either up or down from its original position.
You will need to readjust the handle alignment as
described above.
Speed Balancing Adjustment
If the rider veers to the right or left when the ground
speed control levers are in the maximum forward
position, the top speed of each of these levers can
be balanced by turning the adjustment bolt(s) (A,
Figure 28). Only adjust the speed of the wheel that is
traveling faster.
To Reduce the Speed of the Faster Wheel
1. Loosen the securing nut.
2. Turn the top speed adjustment bolt COUNTER-
CLOCKWISE to reduce the speed.
3. Retighten the securing nut when adjustment is
complete.
Figure 27. Control Lever Adjustment
A. Placement Hardware
B. Ground Speed Control Lever
WARNING
DO NOT adjust the tractor for a faster overall
speed forward or reverse than it was designed
for.
A
B
Figure 28. Top Speed Adjustment
A. Top Speed Adjustment Bolt
B. Control Lever Base
C. Alignment Hardware
B
A
A
C
Not for
Reproduction