Filter
Top Products
Removing and Re-attaching Grass Catcher
15
Figure 8. Install HInge Pins
A. Cover C. Hinge
B. Hinge Pin D. Hair Pin Clip
A
B
C
D
Figure 7. Install Cover
A. Cover C. Hinges
B. Bags
A
C
B
Figure 6. Bags
A. Bags
B. Back Plate
A
Re-attaching the Grass Catcher
1. Set the back plate and support (A, Figure 5) onto pins
of hitch plate (C). Secure with rod (D) and hair pin
(B).
3. Hook the bags (A, Figure 6) on the back plate(B).
4. Install the catcher cover (A, Figure 7 & 8) and secure
with the hinge pins (B) and hair pin clips (D).
NOTE: Push the hair pin clips all the way on or they will
be bent by the hinge when the cover is opened.
5. Insert middle & lower tube (B, Figure 4) into upper
tube (A) and clip (C) onto turbo.
B
B
A
D
C
Figure 5. Install Back Plate
A. Back Plate & Support C. Hitch Plate
B. Hair Pin C. Rod