Filter
Top Products
Initial Collector
Assembly
13
COLLECTOR ASSEMBLY
Assemble Catcher Bags
1. See Figure 1. Insert the wire hoop (H) through the
cloth bag (B).
2. Install the clamp (E) and hanger bracket (D). Secure
with two 5/16-18 x 3/4 carriage bolts (C), lockwashers
(G) and nuts (F).
Install Cover
1. See Figure 2. Hook the bags (A) on the back plate
(B).
Note: If desired, the bags can be lined with 30
gallon trash bags for easy disposal.
2. See Figure 3. Set the cover (A) on top of the bags
(B) and align the hinges (C).
3. See Figure 4. Install the hinge pins (B) through the
the hinges (C) and secure with a hair pin clip (D).
NOTE: Push the hair pin clips all the way on or they will
be bent by the hinge when the cover is opened.
Figure 1. Assemble Catcher Bags
A. Clip E. Clamp
B. Cloth Bag F. Nut
C. 5/16-18 x 3/4 Carriage Bolt G. Lockwasher
D. Hanger Bracket H. Wire Hoop
Figure 2. Install the Bags
A. Bags
B. Back Plate
A
B
A
B
C
D
E
F
G
H
Figure 4. Install HInge Pins
A. Cover C. Hinge
B. Hinge Pin D. Hair Pin Clip
A
B
C
D
Figure 3. Install Cover
A. Cover C. Hinges
B. Bags
A
C
B
CAUTION
Before you begin operating the unit be certain
you have read all of the safety and operational
information of this instruction sheet, as well as
the Operator’s Manual for the tractor and any
other attachments.