Filter
Top Products
5
Pin Installation
Component Installation
PIN INSTALLATION ON LOWER CHUTE
1. Insert the head of pin (C, Figure 3) through front hole
of lower chute (A). Secure with 1/4-20 x 5/8 carriage
bolt (D) and 1/4-20 lock nut (B) as shown.
CARRIAGE BOLT AND PUSH NUT INSTALLATION MOWER
DECK HOUSING
1. Secure the 5/16-18 x 3/4 carriage bolts (A, Figure 4)
onto mower deck housing (C) using 5/16 push nuts
(B).
Note: Retaining carriage bolts with push nuts is optional.
Figure 3. Install Pin
A. Lower Chute
B. Locknut, 1/4-20
C. Pin
D. Carriage Bolt, 1/4-20 x 5/8
A
B
C
D
Figure 4. Install Mounting Plate
A. Carriage Bolts, 5/16-18 x 3/4
B. Push Nuts, 5/16
C. Mower Deck Housing
B
B
A
C
Figure 5. Handle to Tube Installation
A. Handle
B. Locknuts, KEPS, 1/4-20
C. Screw, Slotted, 1/4-20 x 1/2
D. Screw, Slotted, 1/4-20 x 1
E. Strap, Rubber
F. Locknut, Center Lock, 1/4-20
B
D
B
F
A
E
C
HANDLE INSTALLATION
1. Install the handle (A, Figure 5) using 1/4-20 x 1/2
screw (C) and 1/4-20 locknut (B) for rear hole. Use
1/4-20 x 1 screw (D) and 1/4-20 locknut (B) as
shown. Tighten hardware.
2. Install the strap (E) to screw (D) securing with 1/4-20
locknut (F).