Filter
Top Products
Tube and Chute Installation
9
C
A
B
C
D
A
B
E
D
Figure 14. Install Upper Tube to Cover
A. Upper Tube
B. Cover
C. Ridge, Upper Tube
D. Ridge Cutout
Figure 15. Install Middle Tube
A. Lower Chute
B. Strap, Rubber
C. Pin
D. Middle Tube
E. Upper Tube
F. Screw, Phillips Head, 1/4 x 3/4
F
42” & 38” Frame
Hung Mowers
CONNECTING UPPER & MIDDLE TUBE
1. Slide the upper tube (A, Figure 14) into cover (B)
aligning ridge (C) with cutout (D) as shown.
2. Slide middle tube (D, Figure 15) into upper tube (E).
3. Slide middle tube (D) over boot (A). Pull strap (B)
and place hole completely over pin (C).
4. Secure upper tube (E) over middle tube (D) and
secure tubes together using 1/4 x 3/4 screw (F) and
correct hole.