Filter
Top Products
Normal Removal
11
A. Channel Assembly H. Lower Chute
B. Cover I. Pin
C. Pin J. Middle & Upper Tube
D. Hitch K. Strap, Middle
E. Bag L. Ridge
F. White Bar M. Ridge Cutout
G. Tubes
E
L
D
B
Figure 17. Normal Installation & Removal
C
I
H
M
A
G
Collector Removal
1. Unhook strap (K, Figure 17) from pin (I). Remove
middle and upper tube (J) from cover (B).
2. Lift up cover (B) remove and empty bags (E).
3. Remove pin (C). Lift and remove channel assembly
(A) and cover (B) from hitch (D).
WARNING
OPERATION WITHOUT BAGGER
For operation without bagger, the mower
deflector MUST be properly installed in the down
position and retained by the spring latch.
F
K
4. Lift discharge deflector up (E, Figure 16).
5. Remove wing nut (D) from carriage bolt (F).
6. Remove the knob (B) from carriage bolt (C).
7. Remove the lower chute (A) from carriage bolt (F).
8. Remove lower chute (A) from carriage bolt (C).
J