Filter
Top Products
8
Bag, Chute and Tube Installation
Figure 12. Install Collector Bags
A. Cover
B. Collector Bags
C. Tubes
A
C
B
Bag, Chute and Tube Installation
INSTALL COLLECTOR BAGS
1. Raise the cover (A, Figure 12).
2. Slide collector bags (B) onto tubes (C) with the white
bar towards the rear.
Note: It may be necessary to fold seat forward to allow
cover to stay in the raised position.
C
E
D
A
B
Figure 13. Install Lower Discharge Chute
A. Lower Chute
B. Knob, 5/16-18
C. Front Carriage Bolt, 5/16-18 x 3/4
D. Wing Nut, 5/16
E. Discharge Deflector
F. Rear Carriage Bolt, 5/16-18 x 3/4
G. Hinge Bracket
F
G
LOWER DISCHARGE CHUTE INSTALLATION
1. Lift discharge deflector up (E, Figure 13).
2. Place the front hole of the lower chute (A) onto
carriage bolt (C) as shown. Slide front edge of lower
chute (A) under hinge bracket (G).
3. Place the rear hole of the lower chute (A) onto
carriage bolt (F) as shown.
4. Secure knob (B) onto carriage bolt (C) as shown.
5. Secure wing nut (D) onto carriage bolt (F) as shown.