Simplicity 1693847 Tiller User Manual


 
Page 18
Adapted from Briggs & Stratton Corporation, Form No. 274263-10/99.
Engine is shipped from fEngine is shipped from f
Engine is shipped from fEngine is shipped from f
Engine is shipped from f
actoractor
actoractor
actor
y without oil.y without oil.
y without oil.y without oil.
y without oil.
YY
YY
Y
ouou
ouou
ou
mm
mm
m
ust add engine oil befust add engine oil bef
ust add engine oil befust add engine oil bef
ust add engine oil bef
ore starore star
ore starore star
ore star
ting engineting engine
ting engineting engine
ting engine
..
..
.
Adapted from Briggs & Stratton Corporation, Form No. 274263-10/99.
*
Air cooled engines run hotter than automotive engines. Use
of non-synthetic multi-viscosity oils (5W30, 10W-30, etc.)
above 40
ο
F (4
ο
C) will result in high oil consumption and
possible engine damage. Check oil level more frequently if
using these types of oils.
**
SAE 30 oil, if used below 40
ο
F (4
ο
C), will result in hard
starting and possible engine bore damage due to inadequate
lubrication.
Maintenance and Storage
CHECK OR FILL ENGINECHECK OR FILL ENGINE
CHECK OR FILL ENGINECHECK OR FILL ENGINE
CHECK OR FILL ENGINE
CRANKCASECRANKCASE
CRANKCASECRANKCASE
CRANKCASE
1. Add oil according to chart below.
Do not oDo not o
Do not oDo not o
Do not o
vv
vv
v
erfill.erfill.
erfill.erfill.
erfill.
Use a high quality detergent oil classified "For
Service SF-SJ,". Use no special additives with
recommended oils. Do not mix oil with gasoline.
2. Always check oil level before starting engine. Refer
to engine manual for complete instructions.