Filter
Top Products
Page 14
Operation
TILLINGTILLING
TILLINGTILLING
TILLING
1. Adjust the depth regulator lever to desired tilling
depth.
NONO
NONO
NO
TE:TE:
TE:TE:
TE:
Raise depth regulator leRaise depth regulator le
Raise depth regulator leRaise depth regulator le
Raise depth regulator le
vv
vv
v
er up one hole at aer up one hole at a
er up one hole at aer up one hole at a
er up one hole at a
timetime
timetime
time
, testing tiller oper, testing tiller oper
, testing tiller oper, testing tiller oper
, testing tiller oper
ation after each ration after each r
ation after each ration after each r
ation after each r
aiseaise
aiseaise
aise
..
..
.
Raising Raising
Raising Raising
Raising
depth regulator ledepth regulator le
depth regulator ledepth regulator le
depth regulator le
vv
vv
v
er too high can result in loss ofer too high can result in loss of
er too high can result in loss ofer too high can result in loss of
er too high can result in loss of
control of control of
control of control of
control of
tiller!tiller!
tiller!tiller!
tiller!
2. Move the throttle control to
ff
ff
f
astast
astast
ast
.
3. Place the tiller in
ff
ff
f
orworw
orworw
orw
ardard
ardard
ard
by pushing down on the
drive safety control levers--this will engage the
wheels and tines.
NONO
NONO
NO
TE:TE:
TE:TE:
TE:
YY
YY
Y
ou can sloou can slo
ou can sloou can slo
ou can slo
w the tiller's fw the tiller's f
w the tiller's fw the tiller's f
w the tiller's f
orworw
orworw
orw
ard advard adv
ard advard adv
ard adv
ance atance at
ance atance at
ance at
anan
anan
an
y time by time b
y time by time b
y time b
y putting slight doy putting slight do
y putting slight doy putting slight do
y putting slight do
wnwwnw
wnwwnw
wnw
ard pressure on theard pressure on the
ard pressure on theard pressure on the
ard pressure on the
handlebarshandlebars
handlebarshandlebars
handlebars
, or y, or y
, or y, or y
, or y
ou can stop the tiller bou can stop the tiller b
ou can stop the tiller bou can stop the tiller b
ou can stop the tiller b
y releasingy releasing
y releasingy releasing
y releasing
the drthe dr
the drthe dr
the dr
iviv
iviv
iv
e safe saf
e safe saf
e saf
ety control leety control le
ety control leety control le
ety control le
vv
vv
v
ers to the neutrers to the neutr
ers to the neutrers to the neutr
ers to the neutr
al position.al position.
al position.al position.
al position.
CAUTION
To stop wheels and tines at any time, release drive
safety control levers to neutral position.
CAUTION
Always release drive safety control levers to neutral
position before adjusting the depth regulator lever.
Practice operating the controls and tiller with tines out
of ground before beginning to till. It is important that
you know how to use the tiller properly, how to keep
control at all times, how to stop the tines and wheels
from turning, and how to stop the engine if necessary.
If you do not know how to do these things, read the
Controls, Adjustments and Safety sections before
proceeding.